Inside of these few pages you will be able to get the most from your stream account with the simplicity of just following the instructions. Sure, we all have our own individual way of doing things, but appease us on this one please as we have tried to make streaming your church or venue as easy as possible.
CHECK LIST
Now, lets set it up!
How To Set Up Your Stream
LIVE BROADCAST INSTRUCTIONS
encode settings (VMIX):
VMIX (settings below assume you have upload bandwidth over 1.2mbps. If you have less upload speed, the video bit rate will need to be reduced so that it is 50% or less of the measured upload bandwidth. Upload bandwidth can be measured here: http://testmy.net/upload )
- Click Gear icon next to Stream (bottom of screen)
- Click Add, enter "Streamhoster" click OK
- Destination:
rtmp://fss24.streamhoster.com/lv_username
- Stream Key:
mp4:broadcast1
- Click Advanced:
Username: lv_username
Password: your password
Then click OK
- Change Application to "FFMPEG" at the bottom
- Click Quality gear icon
- enter 530kbps bit rate, 576x432 size, audio bit rate 64kbps
- profile: Main
- level: 3.1
- Keyframe Frequency: 2 seconds
- Audio format: AAC
Click SAVE
Click SAVE and CLOSE
Now click the Stream button in VMIX (bottom).
You can test your stream by clicking this link: http://content.streamhoster.com/preview/lv_username/broadcast1?autoPlay=1&showPlayPauseBtn=0&width=640&height=480 BE SURE TO ADD YOUR USERNAME TO THE RED AREA!